Woke in the wee hours Monday night to thunder rumbles and flashes of day-bright light. PDX weathermen had predicted fair weather, so naturally glassland was having one of its rare thunderstorms.

I snuggled down into the covers and purred, listening to rain drumming on the skylight. No way was I sleeping through this, so I after awhile I pulled out Izzy the ‘Pad and started figuring out how to respond to a bunch of emails I’ve been saving. Finally decided the best way was to simply talk about them here.

The first three are pretty direct (I’m paraphrasing only slightly, mostly to avoid embarrassing anyone):

Cynthia, I really like your XXXX project and have decided to produce them for our upcoming craft fair. I think I will be able to sell a bunch, they are so pretty. However, I have only recently begun fusing glass so the instructions in your blog are too hard. Please send me a full list of materials (glass colors, molds, etc.) as well as full-sized templates for each cut piece. I do not have a glass saw so please make sure I can cut the glass with my glass cutter. I will also need your firing schedules and any additional instructions or pictures you have so I can see how the back looks. The craft fair is in three weeks, so I will need this as soon as possible. Your prompt attention is advised and my address is below.

I am a fine arts student who really much admires your glass portraits. Your old woman sculpture is exactly what I need for a project this semester, she is so fierce. I do not have enough money to make my own silicone molds so would it be possible to send me your old woman mold? I promise to return it when I am done. You could be the reason I get a A!

I have decided to start a website about glass and will be using articles from your blog. However, your photos are too small and I tried enlarging them but they don’t look good. Would you please send me bigger pictures of the following articles?

The fourth was more subtle, from someone I’ve never apparently met (also paraphrasing because it was looong):

Please come to my party!! I’m having a BBQ on Saturday and would love to have you as my guest. I am a novice fused glass artist who attended XXXX and fell in love with your work. I picked up your business card there and I think we should be friends! Please bring a small glass item to donate to help me raise funds for a worthy cause.

And the fifth, which is actually a composite of several emails:

Cynthia, you would be so proud of me! I just got a (great teaching gig) for next summer, using descriptions and photos from your blog. I am basing the whole class on (a glass project in this blog). It would really help me if you could send me your photos and studio notes as there are some parts of this technique that are not quite working for me.

Uhm… maybe I should explain a few things.

Folks, I appreciate the attention and I really enjoy hearing from people about the stuff I post on this blog. (and I’m not kidding). I wouldn’t post glassmaking stuff if it weren’t:

  1. A good way for me to clarify processes for myself (and keep records)
  2. A nice way to pay back everyone who has helped me
  3. Let’s be honest, something of an ego boost

However–trying to be as nice as possible here–I do have some rules about how this works:

Copyright
Everything in this blog *is* copyrighted (that’s what that little footnote at the bottom of each page tells you), which means that while you can quote small excerpts from these blogposts or link to them, you CANNOT reprint, repost or publish my text, pictures, downloads or diagrams without my expressed, written permission.

I’m actually pretty good about giving that permission but you must formally ask, and be willing to provide linkbacks, credit and/or–if you’re planning to make money from this stuff–a cut or a box of raspberries or a map to a gold mine or something.

And yup, I do use online plagiarism finders (and people frequently send “did you know your blog is on —-” notes), so please…ask first and avoid a lot of trouble for both of us.

Technical support and firing schedules
I’m pretty good about answering questions in the comment section of this blog or by private email, and I try to be prompt. However, I’m also lazy, have a dayjob and am only describing what worked for me. While I’m happy to clarify where possible, I can’t customize a project for specific reader requirements.

I do occasionally post my firing schedules…with a LOT of caveats. They’re at best examples, and most likely won’t work in all kilns. If you don’t test them first, before firing some big, expensive project…be prepared for heartache.

Mostly, though, what I’m posting is less recipe book and more starting point for your own explorations. Working through the details and filling in the gaps is the best way to learn, so if you don’t get something, please try it yourself before asking.

Giving out templates, designs, molds, etc.
Never gonna happen unless someday I decide to sell this stuff, which has so far been pretty easy to resist. If I have templates for fusing projects, they were probably traced on newsprint and recycled about 15 minutes after the project became a birthday present.

My silicone mastermolds are, well, sacred, and I don’t share them.

I *am* working on a book about casting methods, but not very hard. Someday, probably when I’m 90, I’ll publish it. I’ve also got a fairly long waiting list to teach, and one of these days–when I find a venue and some time–I actually will. Fill out the contact form if you’re interested, but it’s liable to be awhile.

Donations
As I mentioned awhile back, the first (and last) time I donated my work for charitable purposes it didn’t get a very good reception. I now confine my donations to money or time (or old household stuff), just to play fair.

Advertising and disclosure
Many people have suggested I add advertising to this blog, and in a couple of rather interesting cases I was offered free products in exchange for writing favorably about them. This is pretty common nowadays, but I’m enough of a curmudgeonly old-school journalist that I don’t think much of it and I don’t do it.

Most of the time I buy my own supplies, and if I’m writing about something, I’ve most likely paid for it. In the rare cases that someone is nice enough to give me stuff–which *does* happen–I will mention that I got it for free if/when I write about it (i.e., I try to practice disclosure). More often, I solve the problem by just not writing about it to begin with.

Not being beholden to folks means I can say exactly what I think, and I wouldn’t give that up for the world.

So…hope y’all understand.